LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 384 (HVAC - Climate Control System (Service Information)) >> Removal And Installation >> Auxiliary Heater Control Module (AHCM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the Auxiliary Heater Control Module (AHCM) electrical connector.
  3. Remove the 2 AHCM battery cable nuts and disconnect the cables.
  4. Remove the 2 AHCM screws.
  5. Remove the AHCM.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals