Cylinder Head Temperature (CHT) Sensor
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The intake manifold must be removed to perform this procedure. For additional information, refer to
ENGINE - 6.8L (3V)
.
NOTE:
Do not reuse the CHT sensor, install a new one. Coat the new CHT sensor threads with high temperature nickel anti-seize lubricant prior to installation.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Cylinder Head Temperature (CHT) sensor electrical connector (part of 12C508) |
| 2 | 6G004 | CHT sensor |