Camshaft Position (CMP) Sensor

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Lubricate the CMP sensor O-ring seal with clean engine oil prior to installation.

Fig 1: Camshaft Position Sensor Replacement Components With Torque Specifications - 6.8L

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	-	Camshaft Position (CMP) sensor electrical connector (part of 12C508)
2	N806155	CMP sensor bolt
3	6B288	CMP sensor
4	-	CMP sensor O-ring seal (part of 6B288)