Removal and Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear seat storage compartment partition.
- Remove the 6 rear seat storage compartment bolts.
- To install, tighten to 15 Nm (133 lb-In).
- Disconnect the power point electrical connector and remove the rear seat storage compartment.
- To install, reverse the removal procedure.