LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 359 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift up to remove the window and door lock control switch moulding.
  2. Disconnect the door lock control switch electrical connector.
  3. Release the retaining clips and remove the door lock control switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals