LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 359 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Latch Remote Control - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the interior front door handle. For additional information, refer to INTERIOR DOOR HANDLE - FRONT .
  2. Remove the interior door handle cup.
  3. Release the front door latch actuating cable locators.
    Fig 1: Locating Front Door Latch Actuating Cable Locators
    G07975555Courtesy of FORD MOTOR CO.
  4. Remove the front door latch remote control.
    • Disconnect the cable conduit.
    • Disconnect the cable.
  5. To install, reverse the removal procedure.