LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Seat System - Seats) >> Diagnosis And Testing >> Seating >> Pinpoint Tests >> Pinpoint Test A: The Power Seat is Inoperative - Driver, With Manual Recliner >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The driver seat control switch is supplied voltage and ground. When the driver seat control switch is activated, voltage and ground is supplied to the applicable seat track motor to move the seat to the desired position. There are 3 seat track motors that combine to move the seat cushion horizontally (forward/rearward) and vertically (front up/down and rear up/down).

This pinpoint test is intended to diagnose the following: