LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Interior Trim And Ornamentation) >> Removal And Installation >> Cab Rear Trim Panel - Crew Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear center safety belt retractor. For additional information, refer to SAFETY BELT SYSTEM .
  2. Remove the RH and LH C-pillar trim panels. For additional information, refer to C-PILLAR TRIM PANEL - CREW CAB .
  3. Remove the 2 cab rear trim panel pushpin retainers.
    Fig 1: Locating Cab Rear Trim Panel Pushpin Retainers
    G06779591Courtesy of FORD MOTOR CO.
  4. Remove the cab rear trim panel.
  5. To install, reverse the removal procedure.