Normal Operation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
The operating voltage required to supply the ABS module, hydraulic pump and isolation valves is in a range between 9 and 16 volts and vehicle speed is be greater than 5 km/h (3 mph).
- DTC B1317 (Battery Voltage High) - a continuous and on-demand DTC that sets if the voltage supplied to the ABS module is above 16 volts during the ABS module self-test or normal operation and vehicle speed is greater than 5 km/h (3 mph).
This pinpoint test is intended to diagnose the following:
- Charging system concern
- ABS module