LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Suspension System - General Information -- F250-F550 Super Duty) >> General Procedures >> Ride Height Measurement >> Front Ride Height Measurement >> F250 and F350, Four-Wheel Drive (4WD), F450 and F550

F250 and F350, Four-Wheel Drive (4WD), F450 and F550

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Ride Height - F250 And F350, Four-Wheel Drive (4WD), F450 And F550
G06762683Courtesy of FORD MOTOR CO.
Item Description
1 Bottom of the jounce bumper bracket at the frame (measurement point 1)
2 Top of shock tower (measurement point 2)
3 Ride height = distance between measurement point 1 and measurement point 2
    NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure.
  1. To obtain vehicle ride height, measure the distance between points 1 and 2. For additional information, refer to Specifications .