Axle Shaft: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The wheels and tires do not have to be removed in order to remove the axle shafts.

Remove and discard the 8 axle shaft bolts.

Fig 1: Locating Axle Shaft Retaining Bolts
Courtesy of FORD MOTOR CO.
Remove the axle shaft.

Fig 2: Removing Axle Shaft
Courtesy of FORD MOTOR CO.
Inspect the axle shaft O-ring seal for cracks, nicks or wear and install a new seal, if required.

Fig 3: Inspecting Axle Shaft O-Ring Seal For Cracks
Courtesy of FORD MOTOR CO.