LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> Removal And Installation >> Instrument Panel Cluster (IPC) Lens >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Instrument Panel Cluster (IPC). For additional information, refer to Instrument Panel Cluster (IPC) .
  2. Remove the 2 IPC lens and mask screws.
  3. Release the 8 retaining tabs and remove the IPC lens and mask assembly.
    Fig 1: Locating IPC Lens Retaining Tabs
    G06763358Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals