Section 33 (HVAC - Climate Control System - General Information And Diagnostics -- F250-F550 Super Duty): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® A/C Cooling Coil Coating YN-29 |
- | - |
| Motorcraft® A/C System Flushing Solvent YN-23 |
- | - |
| Motorcraft® PAG Refrigerant Compressor Oil YN-12-D |
WSH-M1C231-B | 6.2L or 6.8L - 120 ml (4.1 fl oz) 6.7L Diesel - 100 ml (3.4 fl oz) |
| Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) |
WSH-M17B19-A | 6.2L or 6.8L - 0.77 kg (29 oz) (1.7 lb) 6.7L Diesel - 0.74 kg (26 oz) (1.63 lb) |
| Stay-Brite® R-134a Leak Detection Dye 164-R6060 (Rotunda) |
- | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| A/C Compressor Magnetic Clutch | |
| Air gap clearance | 0.35-0.65 mm (0.014-0.026 in) |
| Evaporator Temperature Sensor | |
| A/C clutch cut-out temperature | 5°C (41°F) |
| A/C clutch cut-in temperature | 5.5°C (42°F) |
| A/C Pressure Transducer (6.2L or 6.8L) | |
| High pressure cut-out | 3, 267 kPa (475 psi) |
| High pressure cut-in | 2, 338 kPa (340 psi) |
| A/C Pressure Transducer (6.7L Diesel) | |
| High pressure cut-out | 3, 267 kPa (475 psi) |
| High pressure cut-in | 1, 719 kPa (250 psi) |
| A/C Pressure Relief Valve | |
| Close pressure | 2, 758 kPa (400 psi) |
| Refrigerant System Dye | |
| R-134a Leak Detection Dye 164-R6060 or 164-R6081 | - |