Resonator - Gasoline Engines: Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Position the resonator into the muffler or, if equipped, the exhaust intermediate pipe.
- If equipped, connect the exhaust intermediate pipe isolator, the front muffler isolator and the resonator isolator.
- Install the 2 exhaust Y-pipe with dual catalytic converter-to-resonator bolts.
- Tighten to 40 Nm (30 lb-ft).
- Tighten the 2 exhaust Y-pipe with dual catalytic converter-to-resonator Torca® clamp nuts.
- Tighten to 48 Nm (35 lb-ft).
- Make sure the button on the resonator is fully inserted into the button slot on the muffler or, if equipped, the exhaust intermediate pipe and tighten the resonator-to-muffler Torca® clamp or, if equipped, the exhaust intermediate pipe Torca® clamp.
- Tighten to 55 Nm (41 lb-ft).