Turbine Shaft Speed (TSS) Sensor: Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Install the TSS sensor and install the bolt.
- Tighten to 11 Nm (97 lb-in).
- Connect the TSS sensor electrical connector.
- Install the main control. Refer to MAIN CONTROL .