LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Automatic Transmission - 6R140 (TORQSHIFT-R-6)) >> Removal & Installation >> Output Shaft Speed (OSS) Sensor >> Removal

Output Shaft Speed (OSS) Sensor: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid pan. Refer to TRANSMISSION FLUID PAN .
  2. Disconnect the OSS sensor electrical connector.
    Fig 1: Locating OSS Sensor Electrical Connector
    G07482879Courtesy of FORD MOTOR CO.
  3. Remove the bolt and remove the OSS sensor.
    Fig 2: Locating OSS Sensor Mounting Bolt
    G07482880Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals