LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Safety Belt System) >> Removal And Installation >> Safety Belt Retractor and Pretensioner - Front, SuperCab >> Notes

Safety Belt Retractor and Pretensioner - Front, SuperCab: Notes

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: RH shown, LH similar.
Fig 1: Exploded View Of Safety Belt Retractor And Pretensioner With Torque Specifications (Front, SuperCab)
G07486253Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - D-ring bolt (part of 611B08 RH/611B09 LH)
2 25508 RH/25509 LH Rear door upper trim panel
3 253A36 RH/253A37 LH Rear door weather-strip
4 N808453 Rear door lower trim panel screws (3 required)
5 N807673 Rear door lower trim panel screw
6 60262 D-ring cover
7 60220 Safety belt finish trim panel
8 - Rear door window latch screws
9 - Safety belt retractor and pretensioner bolt (part of 611B08 RH/611B09 LH)
10 27406 RH/27407 LH Rear door lower trim panel
11 - Safety belt retractor and pretensioner belt anchor cover (part of 611B08 RH/611B09 LH)
12 - Safety belt retractor and pretensioner anchor bolt (part of 611B08 RH/611B09 LH)
13 - Felt washer (part of 611B08 RH/611B09 LH)