LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Safety Belt System) >> Removal And Installation >> Safety Belt Retractor and Pretensioner - Front, Crew Cab >> Notes

Safety Belt Retractor and Pretensioner - Front, Crew Cab: Notes

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: RH shown, LH similar.
Fig 1: Exploded View Of Safety Belt Retractor And Pretensioner With Torque Specifications (Front, Crew Cab)
G07486251Courtesy of FORD MOTOR CO.
Item Part Number Description
1 20708 Front door opening weather-strip
2 13208 RH/13209 LH Front door opening scuff plate
3 25324 Rear door opening weather-strip
4 13228 RH/13229 LH Rear door opening scuff plate
5 278D12 RH/278D13 LH Upper B-pillar trim panel
6 60262 D-ring cover
7 - D-ring bolt (part of 611B08 RH/611B09 LH)
8 - Screw (2 required)
9 278D12 RH/278D13 LH Lower B-pillar trim panel
10 31458 Screw cover (2 required)
11 62220 Safety belt bezel
12 - Safety belt retractor and pretensioner bolt (part of 611B08 RH/611B09 LH)
13 - Safety belt retractor and pretensioner anchor bolt (part of 611B08 RH/611B09 LH)