Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Remove the overhead console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Disconnect the 2 overhead console electrical connectors.
Remove the light assembly from the overhead console.
1. Carefully pull the 2 rear tabs outward and rotate the light assembly slightly away from the overhead console.
2. Carefully pull the 2 front tabs outward and remove the light assembly from the overhead console.
  
  Fig 1: Identifying Overhead Console Tabs
  Courtesy of FORD MOTOR CO.
Disengage the 4 tabs and remove the switch from the light assembly.

Fig 2: Locating Light Assembly Switch Tabs
Courtesy of FORD MOTOR CO.
Disengage the 2 tabs and remove the switch bezel from the switch.

Fig 3: Locating Switch Bezel Switch Tabs
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.