Removal and Installation
WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Remove the rear door check arm-to-body screw.
- To install, tighten to 25 Nm (18 lb-ft).
- Remove the rear door check arm-to-door nuts.
- To install, tighten to 12 Nm (106 lb-in).
- Remove the rear door check arm.
- To install, reverse the removal procedure.