Door Alignment - Rear, SuperCrew

All adjustments 

1. Remove the rear door striker.
   Fig 1: Locating Rear Door Striker

   Courtesy of FORD MOTOR CO.

   Horizontal and vertical adjustments 

2. Loosen the rear door hinge-to-rear door bolts.
   Fig 2: Locating Rear Door Hinge-To-Rear Door Bolts

   Courtesy of FORD MOTOR CO.
3. Adjust the rear door. For additional information, refer to the dimensions in BODY PANEL SYSTEM - BODY REPAIRS .
4. Tighten the rear door hinge-to-rear door bolts to 30 Nm (22 lb-ft).

   Fore and aft adjustment 

5. Remove the B-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
6. Loosen the rear door hinge-to-body nuts.
   Fig 3: Locating Rear Door Hinge-To-Body Nuts

   Courtesy of FORD MOTOR CO.
7. Adjust the door. For additional information, refer to the dimensions in BODY PANEL SYSTEM - BODY REPAIRS .
8. Tighten the rear door hinge-to-body nuts to 30 Nm (22 lb-ft).
9. Install the B-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

   All adjustments 

10. Install the rear door striker.
    • Tighten to 25 Nm (18 lb-ft).
      Fig 4: Locating Rear Door Striker

      Courtesy of FORD MOTOR CO.