LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Brake System - General Information -- F250-F550 Super Duty) >> General Procedures >> Brake System Inspection >> Brake Calipers and Anchor Plates

Brake Calipers and Anchor Plates

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake calipers for leaks, damage to seals, and piston corrosion or binding.
    • If the brake caliper is leaking or otherwise damaged, install a new brake caliper. For additional information, refer to FRONT DISC BRAKE for front brake calipers or REAR DISC BRAKE for rear brake calipers.
  2. Inspect brake caliper anchor plate for corrosion build up. Clean or install new anchor plates as necessary.
scientia non olet · About LEMON Manuals