LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Rear Suspension -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Installation

Wheel Studs - Single Rear Wheel (SRW): Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the wheel stud in the flange making sure that the serrations are aligned with those made by the original wheel stud.
  2. Using the C-Frame and Screw Assembly, install the wheel stud.
    Fig 1: Installing Wheel Stud
    G06136804Courtesy of FORD MOTOR CO.
  3. Install the rear wheel hub assembly. For additional information, refer to REAR DRIVE AXLE/DIFFERENTIAL - DANA 80 .
scientia non olet · About LEMON Manuals