LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Fuel Charging System & Fuel Control System - 3.5L GTDI) >> General Procedures >> Fuel Injection Pump Roller Tappet Inspection

Fuel Injection Pump Roller Tappet Inspection

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the fuel injection pump tappet for flat spots or scoring. If any damage is found, inspect the fuel injection pump and the fuel injection pump tappet drive lobe. Install new components as necessary.
    Fig 1: Checking Fuel Injection Pump Roller Tappet
    G08340057Courtesy of FORD MOTOR CO.