LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Wheels & Tires -- F250-F550 Super Duty) >> Diagnosis And Testing >> Wheels And Tires >> Inspection and Verification >> Outer Edge/Shoulder Wear

Outer Edge/Shoulder Wear

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Outer edge (or shoulder) wear occurs on the outside edge of the tire and is usually caused by excessive toe in and/or excessive positive camber. If the tread depth of the inner shoulder is at least 50% greater than the tread depth of the outer shoulder, the tire is experiencing outer edge/shoulder wear. To determine whether tires have this type of wear, visually inspect the tires. In some instances, the tread depth of each rib may need to be measured and compared to that of the shoulder.

NOTE: RF tire shown in illustration, others similar.
Fig 1: Locating Outer Edge (Or Shoulder) Wear
G06072755Courtesy of FORD MOTOR CO.