Rain Sensor: Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Glass must be clean and dry.

Clean the specified component with the specified material.

Fig 1: Cleaning Glass
Courtesy of FORD MOTOR CO.
NOTE: If rain sensor gel is damaged or contaminated a new sensor must be installed.

If installing original rain sensor, visual check.

Fig 2: Inspecting Original Rain Sensor
Courtesy of FORD MOTOR CO.
Fig 3: Locating Rain Sensor Electrical Connector
Courtesy of FORD MOTOR CO.
Fig 4: Installing Rain Sensor
Courtesy of FORD MOTOR CO.