LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine System - General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Valve Spring Strength

Valve Spring Strength

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS CHART

G06094751
 Pressure Gauge, Valve/Clutch Spring
303-006 (TOOL-6513-DD) or equivalent
NOTE: Refer to the appropriate ENGINE article service information for the specification.
  1. Use the Valve/Clutch Spring Pressure Gauge to check the valve spring for correct strength at the specified valve spring length.
Fig 1: Checking Valve Spring Correct Strength Using Valve/Clutch Spring Pressure Gauge
G06064108Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals