LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine System - General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Flywheel Inspection

Flywheel Inspection

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The flywheel cannot be resurfaced, it must be replaced.
    Fig 1: Identifying Flywheel Inspection Areas
    G06167890Courtesy of FORD MOTOR CO.
  1. Inspect the flywheel for:
    1. any cracks.
    2. worn ring gear teeth.
    3. chipped or cracked ring gear teeth.
    4. scratches, nicks and discoloration.