LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine System - General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Cylinder Bore Out-of-Round

Cylinder Bore Out-of-Round

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate ENGINE article service information for the specification.
  1. Measure the cylinder bore in 2 directions. The difference is the out-of-round.
Fig 1: Identifying Cylinder Bore Out-Of-Round Measuring Directions
G06073203Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals