Crankshaft Main Bearing Journal-to-Bearing Clearance

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to the appropriate ENGINE article service information for the specification.

NOTE: Crankshaft main bearing journals must be within specifications before checking journal clearance.

Remove the crankshaft main bearing caps and crankshaft main bearing.
Lay a piece of Plastigage across the face of each crankshaft main bearing surface.

Fig 1: Locating Crankshaft Journal Clearance
Courtesy of FORD MOTOR CO.

NOTE: Do not turn the crankshaft while carrying out this procedure.

Install and remove the crankshaft main bearing cap.
Verify the crankshaft journal clearance.

Fig 2: Verifying Crankshaft Journal Clearance

Courtesy of FORD MOTOR CO.