LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine System - General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Crankshaft Main Bearing Journal Diameter

Crankshaft Main Bearing Journal Diameter

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate ENGINE article service information for the specification.
  1. Measure each of the crankshaft main bearing journal diameters in at least 2 directions.
Fig 1: Identifying Crankshaft Main Bearing Journal Diameters
G06064060Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals