Camshaft Runout
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS CHART
| Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent |
NOTE:
Refer to the appropriate ENGINE article
service information for the specification.
- Using the Dial Indicator Gauge with Holding Fixture, measure the camshaft runout.
- Camshaft must be supported on the first and last camshaft bearing journal.
- Rotate the camshaft and subtract the lowest Dial Indicator Gauge reading from the highest Dial Indicator Gauge reading.
NOTE:
Camshaft journals must be within specifications before checking runout.