LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine System - General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Bearing Inspection

Bearing Inspection

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inspecting Bearings For Defects
G06064117Courtesy of FORD MOTOR CO.
  1. Inspect bearings for the following defects:
    1. Cratering - fatigue failure
    2. Spot polishing - incorrect seating
    3. Imbedded dirty engine oil
    4. Scratching - dirty engine oil
    5. Base exposed - poor lubrication
    6. Both edges worn - journal damaged
    7. One edge worn - journal tapered or bearing not seated
scientia non olet · About LEMON Manuals