Turbocharger Intake Pressure and Temperature Sensor (TCIPT) - 3.5L GTDI: Removal

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

WARNING: Before beginning any service procedure , refer to SAFETY WARNINGS in GENERAL INFORMATION. Failure to follow this instruction may result in serious personal injury.

For additional information, refer to the GENERAL INFORMATION article.
Fig 1: Locating Turbocharger Intake Pressure And Temperature Sensor Connector And Mounting Clamp
Courtesy of FORD MOTOR CO.
- To install, tighten to 3 Nm (27 lb-in).
  
  Fig 2: Locating Turbocharger Intake Pressure And Temperature Sensor Mounting Bolts
  Courtesy of FORD MOTOR CO.