LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Electronic Engine Controls) >> Removal And Installation >> Crankshaft Position (CKP) Sensor - 5.0L (4V) >> Removal

Crankshaft Position (CKP) Sensor - 5.0L (4V): Removal

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold. For additional information, refer to ENGINE MECHANICAL - 5.0L .
  2. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.
  3. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
  4. NOTE: The Crankshaft Position (CKP) sensor bolt is part of the CKP sensor and cannot be removed.

    Loosen the bolt and remove the CKP sensor.

scientia non olet · About LEMON Manuals