LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Rear Door Latch - Upper, SuperCab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the upper door latch actuating cable from the interior door handle.
  3. Remove the interior door handle actuating cable from the guide clips.
  4. Remove the 3 upper door latch bolts and the upper door latch.
    • To install, tighten to 12 Nm (106 lb-in).
  5. To install, reverse the removal procedure.