LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Handles, Locks, Latches And Entry Systems) >> General Procedures >> Latch Lubrication >> Material

Latch Lubrication: Material

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification
Multi-Purpose Grease
XG-4 and/or XL-5
ESB-M1C93-B
  1. Open the door.
  2. Using a screwdriver, fully close the latch (2 clicks).
    Fig 1: Checking Latch Operation Using Screwdriver
    G06071166Courtesy of FORD MOTOR CO.
  3. Spray the multi-purpose grease into the opening on the door latch for approximately 5 seconds.
    Fig 2: Spraying Multi-Purpose Grease Into Door Latch Opening
    G06077610Courtesy of FORD MOTOR CO.
  4. Open the latch using either the interior or exterior door handle.
  5. Open and close the door several times to circulate the lubricant inside the latch.
  6. Wipe off any excess grease.