Front Seat Motor Cable: Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The front seat motor cable service part for the driver seat is different than the service part for passenger seat. Make sure to install the correct service part required for the seat.

Fig 1: Installing Front Seat Motor Cable Service Part
Courtesy of FORD MOTOR CO.
NOTE: The cable felt covering should not be visible when the cable is correctly engaged to the horizontal motor square drive.
- Push the cable into the horizontal motor square drive twisting back and forth to engage the cable.
  
  Fig 2: Pushing Cable Into Horizontal Motor Square Drive
  Courtesy of FORD MOTOR CO.
Fig 3: Engaging Front Seat Motor Cable
Courtesy of FORD MOTOR CO.
Fig 4: Connecting Front Seat Motor Cable
Courtesy of FORD MOTOR CO.
Install the side shield and screws.

Fig 5: Locating Side Shield Mounting Screws
Courtesy of FORD MOTOR CO.
If equipped.

Fig 6: Locating Seat Control Connector
Courtesy of FORD MOTOR CO.
If equipped.

Fig 7: Removing Front Seat Adjusting Lever Retaining Clips
Courtesy of FORD MOTOR CO.
Install the front seat. Refer to SEAT - FRONT .