LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Seat System - Seats) >> General Procedures >> Seat Wire Harness Routing >> Manual Passenger Seat Track >> Manual Seat Wire Harness View

Manual Seat Wire Harness View

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the steps at the beginning of this procedure for installation instructions.
Fig 1: Manual Seat Wire Harness View And Related Components
G07965517Courtesy of FORD MOTOR CO.
Item Description
1 Side air bag wire harness retainer
2 BTS wire harness retainers
3 (1) BTS wire harness electrical connector and retainer
4 Safety belt buckle wire harness retainer
5 OCS weight sensor bolt C wire harness retainer
6 (2) Safety belt buckle wire harness retainer
7 OCSM electrical connector
8 (3) OCS weight sensor bolt C electrical connector
9 OCS weight sensor bolt D electrical connector
10(2) Safety belt buckle electrical connector and retainer
11 Side air bag wire harness electrical connector
12 Seat wire harness electrical connector
13 Side air bag wire harness retainer
14 Side air bag wire harness retainer
15 Side air bag wire harness retainer
(1) Refer to view B (see Figure).
(2) Refer to view A (see Figure).
(3) Make sure wire harness routes on the correct side of seat track lever, as shown in illustration (see Figure).