Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Remove the A-pillar trim panels. For additional information, refer to A-PILLAR TRIM PANEL .
Remove the B-pillar trim panels. For additional information, refer to B-PILLAR TRIM PANEL - REGULAR CAB .
Open the garment hook screw covers.

Fig 1: Locating Garment Hook Screw Cover
Courtesy of FORD MOTOR CO.
Remove the garment hook screws and remove the hooks.

Fig 2: Locating Garment Hook Screw
Courtesy of FORD MOTOR CO.
Remove the sun visor screws and remove the sun visors.
- If equipped, disconnect the electrical connector.
  
  Fig 3: Locating Sun Visor Screws
  Courtesy of FORD MOTOR CO.
Remove the sun visor clip screws and remove the sun visor clips.

Fig 4: Locating Sun Visor Clip Screw
Courtesy of FORD MOTOR CO.
If equipped, disconnect the mirror electrical connector and the rain sensor.

Fig 5: Locating Mirror Electrical Connector And Rain Sensor
Courtesy of FORD MOTOR CO.
Disconnect the headliner electrical connectors.

Fig 6: Locating Headliner Electrical Connectors
Courtesy of FORD MOTOR CO.
Position the seats to the full reclined position.
Remove the headliner out of the passenger side door.