Section 246 (Rear Drive Axle/Differential (9.75-Inch Ring Gear)): Specifications: Material
WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification | Fill Capacity |
|---|---|---|
| Additive Friction Modifier XL-3 (US); CXL-3 (Canada) |
EST-M2C118-A 118 | ml (4 oz) to be installed before axle lubricant - Not to be used with Electronic Locking Differentials (ELD) |
| Maximum Strength Retaining Compound Loctite® 638™ | - | - |
| Motorcraft® High Contrast Hypoid Gear Marking Compound XG-14 |
- | - |
| Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL (US); CXY-75W140-1L (Canada) |
WSL-M2C192-A and GL-5 | 2.84L (6.0 pt) - ELD only 2.60L (5.5 pt) - Non Traction-Lok equipped 2.48L (5.25 pt) - Traction-Lok equipped |
| Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada) |
ESA-M1C75-B | - |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 | - |
| Threadlock and Sealer TA-25 |
WSK-M2G351-A5 | - |