Removal and Installation
WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the steering column shrouds. For additional information, refer to STEERING COLUMN .
- If equipped, remove the steering column control switch. For additional information, refer to STEERING COLUMN CONTROL SWITCH .
- Turn the steering wheel 90 degrees to the left and remove the 2 screws and the multifunction switch.
- To install, tighten to 2 Nm (18 lb-in).
- To install, reverse the removal procedure.