LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Exterior Lighting System) >> Removal And Installation >> Ballast >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headlamp assembly. Refer to HEADLAMP ASSEMBLY .
    2. Fig 1: Locating Headlamp Assembly Mounting Bolts
    G08343041Courtesy of FORD MOTOR CO.
  2. Fig 2: Locating Headlamp Connector
    G08343042Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals