LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> Removal And Installation >> Instrument Panel Cluster (IPC) Lens >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Instrument Cluster (IC). For additional information, refer to INSTRUMENT PANEL CLUSTER (IPC) .
  2. Remove the 2 screws.
  3. Release the 7 tabs and remove the IC lens.
    Fig 1: Locating Instrument Cluster (IC) Lens Tabs
    G06172371Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.