LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AN: The Headlamps On Warning Chime Is Inoperative >> Pinpoint Test An: The Headlamps On Warning Chime Is Inoperative

Pinpoint Test An: The Headlamps On Warning Chime Is Inoperative

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. AN1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • While monitoring the safety belt warning chime, transition the ignition switch from OFF to RUN.
    • Does the safety belt warning chime operate for approximately 6 seconds? 
  2. AN2 CHECK THE INTERIOR LAMPS OPERATION 
    • Open and close the driver door.
    • Observe the interior lamps.
    • Do the interior lamps operate correctly from the driver door? 
  3. AN3 CHECK THE KEY-IN-IGNITION WARNING CHIME OPERATION 
    • Ignition OFF.
    • Insert the key into the ignition lock cylinder.
    • Open the LH front door and observe the key-in-ignition warning chime operation.
    • Does the key-in-ignition warning chime sound? 
  4. AN4 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST 
    • Check for recorded IPC DTCs from the self-test.
    • Are any DTCs recorded? 
  5. AN5 RETRIEVE THE RECORDED DTCs FROM THE BCM SELF-TEST 
    • Check for recorded BCM DTCs from the self-test.
    • Are any DTCs recorded? 
scientia non olet · About LEMON Manuals