LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Engine System - General Information) >> General Procedures >> Cylinder Bore Cleaning >> Material

Cylinder Bore Cleaning: Material

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) WSS-M2C945-A
  1. NOTE: If these procedures are not followed, rusting of the cylinder bores may occur.

    Clean the cylinder bores with soap or detergent and water.

  2. Thoroughly rinse with clean water and wipe dry with a clean, lint-free cloth.
  3. Use a clean, lint-free cloth and lubricate the cylinder bores.
    • Use clean engine oil meeting Ford specification.
scientia non olet · About LEMON Manuals