LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Wheels & Tires) >> Removal And Installation >> Wheel and Tire >> Removal

Wheel and Tire: Removal

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Center Cap, Nut, Wheel And Tire Assembly
G06166632Courtesy of FORD MOTOR CO.
Item Part Number Description
1 1130 Center cap (if equipped)
2 1012 Wheel nut (6 or 7 required)
3 - Wheel and tire assembly
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. NOTE: Do not use heat to loosen a seized wheel nut or damage to the wheel and wheel bearing can occur.

    Remove the 6 or 7 wheel nuts.

  3. Remove the wheel and tire assembly.