LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Automatic Transmission (6R80)) >> Diagnosis And Testing >> Torque Converter Diagnosis >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
G06139341
 Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: If the torque converter is replaced, use the scan tool and follow the on-screen instructions and perform the Misfire Monitor Neutral Profile Correction procedure.

Perform all diagnostic procedures prior to torque converter installation. This prevents the unnecessary installation of new or remanufactured torque converters. Only after a complete diagnostic evaluation can the decision be made to install a new torque converter.

scientia non olet · About LEMON Manuals