LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Driveline System - General Information -- F250-F550 Super Duty) >> Diagnosis And Testing >> Driveline System >> Principles of Operation >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical damage.
    VISUAL INSPECTION CHART

    Mechanical
    • U-joints
    • CV joints
    • Center bearings
    • Driveshaft tubes
    • Mounting brackets
    • Flanges
    • Housing and cover damage
    • Differential bearings
    • Differential gear sets
    • Pinion bearings
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and GO to Symptom Chart - Driveline  or GO to Symptom Chart - NVH .