Pickup Bed

The pickup bed consists of:

• styleside pickup bed (pan assembly).
• pickup box tie-down hooks.
• body side wheel opening splash shield.
• rear-wheel opening molding (Four-Wheel Drive (4WD) only).

The styleside pickup bed:

• is standard.
• comes in standard lengths of 1.67 m (5.5 ft) or 1.98 m (6.5 ft) or optional 2.43 m (8 ft) length.
• is double-wall steel construction.
• houses 4 stake pockets in the top of the 1.98 m (6.5 ft) bed and 6 stake pockets on the 2.43 m (8 ft) bed.
• on 4WD vehicles, includes rear-wheel opening moldings.
• is constructed of an inner steel box and steel tailgate with stamped outer panels.

The F-150 SVT Raptor:

• is offered on 4WD only.
• is offered on 1.67 m (5.5 ft) length only.
• has extended styleside outer panels to provide extra clearance for the wheel.

Styleside pickup beds:

• come standard with 4 pickup bed tie-down hooks.

The tailgate assembly consists of:

• tailgate.
• tailgate hinges.
• tailgate support cables.
• torsion rod.
• tailgate step (if equipped).
• tailgate step handle (if equipped).
• rear view camera (if equipped).